With the rapid development of furniture industry, manufacturers have higher and higher requirements on plate opening machinery. All the shaft wheels are selected by expanding sleeve equipment method, which is very easy to protect. Generally, the shortcomings of the push table saw, such as insufficient precision, edge collapse, fault, industrial injury and inferior power, are becoming more and more significant, which troubles the development of enterprises. The birth of computer cutting board saw, effectively avoid the presentation of such problems.

1. The machine adopts the active positioning and feeding method to cut. After the required guideline plate size and quantity are input to the touch screen of the machine, the machine starts the machine, and the machine actively locates the plate for horizontal and vertical cutting;

2. The cutting process is equipped with an active lifting pressure beam to press the plate, the motor drives the saw car to drive forward, and the saw car actively moves on the linear precision guide rail to cut;

3. After cutting the last piece of board, the board will be actively pushed out and positioned to cut the scale of the next piece of board. Equipped with non-connected electromagnetic measuring system, German electronic ruler, communication servo motor to actively implement precision positioning and precision compensation, positioning error as low as ±0.02mm;

4. Saw seat through dynamic balance treatment and rotation test, positive and negative sawing structure, guide rail straightness excellent, large and fine saw blade positive and negative sawing, no edge collapse, continuous layer, no burning saw, excellent straightness, diagonal deviation as low as ±0.2mm;

5. The machine structure is reasonable, stable and thick. Table using 20mm thick high quality steel processing, processing by large precision equipment, pressure resistance, after use, durable adhere to no deformation;

6. The feed port is equipped with manual pull wire urgent parking equipment, and the discharge port is equipped with photoelectric induction equipment to ensure the safety of personnel. Infrared scanning, foreign matter saw blade within 10cm from the saw blade actively sinks and prevent the incident;

7. Parameterized input of cutting scale, input the policy scale to the touch screen, vertical sawing directly after the completion of transverse sawing, no repeated input, manual operation, power is 3 times that of the push table saw.