1. The chain is easy to wear objects, the need to be punctual to the feeding chain, the feeding motor chain to adjust and check, pick up the debris on the chain, appropriate to modify the wheel oil.. Etc.

2. Check the length and tightness of the belt of the main motor on time. If the belt is too tight or too loose, it will constitute a series of problems. Square wood saw safety power transmission device and saw blade completely exposed, unsafe factors, prone to industrial accidents. Power transmission device and saw blade, guide blade, etc., choose completely closed planning, operation is extremely safe.

3. Some of the box and the spindle should be punctual, check whether the oil pipe is a good port, assuming that the machine runs short oil, easy to wear the machine to shorten the service life of the saw.

4. Cushion cover, saw blade, navigation chip need to be punctual with diesel cleaning. After cleaning, clean the appearance with clean cloth. When the equipment is cleaned, there can be no sundries on the cushion cover, saw blade and navigation blade, otherwise it will affect the use of the equipment and the sawing accuracy will be affected.

5. When the main shaft core changes the saw blade every day, the water should be washed out of the water outlet hole once, and the stolen goods should be discharged to ensure that the water outlet hole is dredged.

6. Many saw manufacturers are punctual to check whether the various nuts on the equipment are loose, such as: check whether the spindle nut is loose. Square wood multi-piece saw main function is used for sawing square wood, processing into multi-specification square pieces, processing diameter is large, with smooth feeding, no burning saw blade, saw road small, senior safety advantages, according to you want to saw out the thickness of the plate to replace the pad, saw out different plate, length material is not limited, can process poplar, pine, eucalyptus, fir, green steel wood and other hard miscellaneous wood.

7. Some parts of multi-blade saw manufacturers are made of iron. They do not pay attention to protection and protection, which is very simple to rust and shorten the service life of equipment. Therefore, usually timely clean up the equipment, coated with anti-rust paint, anti-rust oil, placed in the ventilated, monotonous workshop.