In the actual application, the saw edge is not smooth and burst is one of the common problems, which directly affects the beauty of the cut molding wood. To present this situation, we should find the right reason, and deal with the reason. Hua Weiying Machinery explains the following treatment methods of woodworking push saw with various edge burst:

1. The explosive edge is presented on the top of the saw, generally because the saw blade is not sharp, or the device is incorrect when the saw blade is installed, and the wood is too little; If the quality of the cut wood is relatively poor, such as too much impurities, so that the saw blade will soon become dull, cutting will appear burst edge. To deal with the above problems is very simple, if the saw blade is not sharp replacement saw blade can be; Saw blade device is too low to adjust the height of the saw blade; The selection of good quality and less impurities of the plate is more conducive to cutting.

2. The explosive edge is presented below the saw edge. Generally, the auxiliary saw blade becomes dull or the width is not good. The treatment method is to replace the new auxiliary saw blade and adjust the position of the saw blade so that it is in line with the center line of the main saw blade to avoid the appearance of a burst edge.

3. There are traces of burning after the wood saw is finished. This situation is because the saw blade is too blunt, and high temperature will burn the wood when cutting. Replace the new saw blade, choose the right speed and feed can be handled.

Woodworking table saw innovation and advantages:

1. Small motor power, high function, safe power distribution operating system.

2. Pneumatic clamping wood, fast and flexible, high safety function.

3. Adopt high precision linear guide rail, easy to use and flexible, reduce labor intensity.

4. Using large scale ultra-thin saw blade, small saw edge, high utilization rate of raw materials, product specifications and standards.

5. Dust removal protection Protection device.