Truncated saw is used to replace the traditional sawing method, high degree of initiative, high sawing power, can reduce the labor intensity of workers, save labor cost, can drive two circular machine, two rotary tangent line, greatly improve the power of rotary cutting production line. High efficiency, safety, with active feeding function, according to the required length of the active sawing section, and then the active transport of wood to the feeding machine, rotary cutting machine, only one person can control the wood sawing operation, the output value can be up to 200 square per day.For logs less than 30 cm in diameter, active cutting saw can produce up to 200 square meters of wood per day. Active sawmill is a kind of fast sawmill developed for cutting wood segments with fast and consistent specifications in wood processing industry. The important purpose of the new cut saw promotion is to improve the power, and for a long time the power problem appears more in the system level, not only the individual machine level, the ability of the machine is not fully played. At present, the application of the industrial Internet for the system optimization, a substantial increase in power brings the possibility. Corresponding to the domestic situation, due to low-end overcapacity, the power increase of production enterprises still cannot solve the problem of demand, so the trend dividend should flow to enterprises that grasp the data import and application channels.In the past 20 years, the Internet has mainly changed the behavior of consumers. In the future, with the deepening of virtualization and informatization, it will enter the era of industrial Internet. We believe that the Internet is an irreversible trend in transforming the industrial end, especially the woodworking machinery and property end, such as logs, saws, and so on. Since GE put forward the concept of "industrial Internet" in 2012, IBM, Siemens, Huawei and other giants have also laid out their plans. Compared with Germany's "Industry 4.0", the central difference of American industrial Internet is that it suggests starting from the software end of industrial big data and penetrating into the hardware end of traditional manufacturing industry, carrying out property optimization and operation optimization, and improving industrial power. We believe that this development approach may be more suitable for the transformation and promotion of traditional machinery manufacturing industry under the current setting of supply-side reform. Log saw according to domestic advanced models to improve, the use of linear guide rail, precision bearings and linear bearings, has the advantages of compact structure, low power consumption, high precision, large operation platform area, active type are equipped with active start cylinder active clamping active return and active stop equipment long service life, etc. It can also be customized according to the needs of users to operate the log cutting saw. The saw adopts the active saw blade cutting based on the side-moving pneumatic principle, which can cut off the log instantly.

The advantages of truncated saw: Advantage one: it can directly cut the wood to the corresponding length of the log round machine and the peeling machine for the next processing, because the saw blade by the relative fixed between the axes of the sawing out of the wood is accurate enough, and the traditional artificial saw wood power is low and the sawing out of the wood edges and corners are different, simple waste of edge and corner wood increases the industrial cost. Two advantages: In the operation of log cutting saw, it can be operated by one person, and gradually the wood can be transferred to the saw blade in accordance with the sequence driven by the tooth hook chain to cut, reducing the labor cost. The original old method of cutting wood requires 2 to 3 people to work, which is time-consuming and laborious, but one person is only about the operation of wood in the sequence. The other end is directly transported to the designated position by the conveyor belt, the log saw, cut the labor cost, the general labor cost can save the price of the machine within a year.Three advantages: To improve the working environment, the original wood sawing operation is all wood whisker flying scene, the price of the knife grinder, and sawing wood workers working environment is bad, low safety factor, electromagnetic knife grinder, simple accidental injury, full active knife grinder, and the saw blade part of the cut wood saw using sheet design, can reduce the flying phenomenon of wood slag, but also make people away from the saw blade operation, improve the safety factor. Log saw is in the future operation, sharpening machine, can provide a good helper of wood processing.

How to use truncated saw: commonly used tooth shapes are left and right teeth (replacement teeth) flat teeth, ladder flat teeth (concave and convex teeth) inverted trapezoid teeth (hump teeth) and rare industrial grade three left and right, left and right flat teeth, etc., left and right teeth are widely used, log cutting machine cutting speed, repair is relatively simple, suitable for all kinds of logs, square wood, hard miscellaneous wood and so on. Under the condition of normal operation, the sound of the wood cutter is rhythmic and stable, and there will be no noise. If there is harsh noise, and disharmonious noise, it means that there is a question about the equipment. At this time, it should be stopped for inspection, and after eliminating questions, it can be used continuously, so as to extend the service life of the machine and saw blade.

Truncated saw is used to replace the traditional sawing method, high degree of initiative, high sawing power, can reduce the labor intensity of workers, save labor cost, can drive two circular machine, two rotary tangent line, greatly improve the power of rotary cutting production line. High efficiency, safety, with active feeding function, according to the required length of the active sawing section, and then the active transport of wood to the feeding machine, rotary cutting machine, only one person can control the wood sawing operation, the output value can be up to 200 square per day. For logs less than 30 cm in diameter, active cutting saw can produce up to 200 square meters of wood per day.Active sawmill is a kind of fast sawmill developed for cutting wood segments with fast and consistent specifications in wood processing industry. The important purpose of the new cut saw promotion is to improve the power, and for a long time the power problem appears more in the system level, not only the individual machine level, the ability of the machine is not fully played. At present, the application of the industrial Internet for the system optimization, a substantial increase in power brings the possibility. Corresponding to the domestic situation, due to low-end overcapacity, the power increase of production enterprises still cannot solve the problem of demand, so the trend dividend should flow to enterprises that grasp the data import and application channels.In the past 20 years, the Internet has mainly changed the behavior of consumers. In the future, with the deepening of virtualization and informatization, it will enter the era of industrial Internet. We believe that the Internet is an irreversible trend in transforming the industrial end, especially the woodworking machinery and property end, such as logs, saws, and so on. Since GE put forward the concept of "industrial Internet" in 2012, IBM, Siemens, Huawei and other giants have also laid out their plans. Compared with Germany's "Industry 4.0", the central difference of American industrial Internet is that it suggests starting from the software end of industrial big data and penetrating into the hardware end of traditional manufacturing industry, carrying out property optimization and operation optimization, and improving industrial power. We believe that this development approach may be more suitable for the current supply-side reform setting.