The correct operation and use of the edge banding machine can guarantee the quality of the products produced, and together make the use performance of the edge banding machine equipment stable, avoid the equipment problems caused by improper operation and the repair problem of the edge banding machine:

1. Before the edge banding machine guide rail equipment, it is necessary to check whether it is flat, whether the two ends are together, and to be treated by quenching process.

2. As for the outsourced parts, if they are not processed according to the drawings, they will be returned, and the outsourced manufacturers will be certain to lose them. As for the workpiece processed by the regular edging machine in the factory, if it is not processed according to the requirements marked on the drawings, it shall be reassembled and processed.

3. Before the bearing equipment of the edge banding machine, it is necessary to distinguish the glue pot part and the pulley part. Imported bearings should be selected and equipment should be carried out according to the indicated equipment process. The transmission chain and delivery chain of the edge banding machine should be checked. Too tight or too loose is not advisable. It should be moderate.

The above five points are the points for attention in the use of edge banding machine.