In order to better protect the hinged drilling machine equipment and achieve the best operating effect, we should pay attention to some operating instructions. The first is to choose the drill bit is to select the appropriate bit or drill nozzle according to the policy. The drilling rate should be selected according to the data being drilled. If you drill too fast, the bit will heat up and some of the low melting point data will soften, resulting in damage to the guideline.If the drilling rate is too slow, it will cause the adhesion of soft materials, and even cause the machine to surround. The feed times of the hinged drilling machine should be determined according to the depth and aperture of the hole required. Hinged drilling machine belongs to high-speed rotary feeding equipment, so it should be well protected, on the one hand, there is a good protection of the machine, on the other hand, the safety of personnel should be well protected.

The use of hinge drilling machine wear most is the drill, the degree of sharpness of the drill determines the processing level of the processing policy, but also determines the progress of the processing. Therefore, it is necessary to select a high-quality wear-resistant drill bit, replace the drill bit or polish the drill bit after a certain time, so that the drill has a high operating condition. In the process of equipment operation, it is inevitable that a lot of dust will enter the machine, so it is necessary to lubricate the equipment regularly, and the lubricating oil will be added at a certain time distance.

Equipment protection needs to be realized by each employee. If there is no good protection of equipment, it will affect the work efficiency in the work, even affect the quality of the production, affect their reputation in the customer.

1. Select the appropriate bit or drill nozzle according to the material being drilled.

2. Adjust the appropriate speed according to the data drilled. If the speed is too fast, the low melting point data of the bit will be softened; if the speed is too slow, the data of the bit will adhere.

3. According to the drilled hole depth and aperture, confirm the feeding times of the hinge drilling machine.

4. Hinge drilling machine is high-speed rotary feed, special attention to safety protection.

5. Pay attention to ensure the sharpness of the bit, the need to grind the bit or replace the bit at regular intervals.

6. The drilling shaft should be lubricated regularly.