1. Low cost and fast operation.

On the basis of fully considering the actual situation of the factory, through the special numerical control interface, complete the seamless connection of computer and electronic cutting saw, the backward manual cutting method into the machine automatic command operation, the transformation process is simple and fast. Only need to spend low transformation cost, can fully transform your factory opening process, enjoy the high benefit brought by high technology.It is necessary for the operator to understand the electronic cutting saw very well, whether it is the structure of the cutting machine, the application scale is still the skill specification of the cutting machine and the safety code necessary to follow when using, it is necessary to do familiar in the heart, to avoid accidents in use. In addition, before the formal operation, the operator is generally required to carry out an examination, as long as the examination qualified can carry out the operation of electronic cutting saw.

2. Without professional workers, reduce the cost of manpower.

The previous manual layout plan accounting, instruction input and other key links of the material opening, can not be separated from the skilled host hand, you need to pay thousands of yuan of workers' wages every month; The use of electronic saw cutting key links to complete the automatic operation of the computer, the cutting process becomes simple and fast, general work can serve as the host hand.Before the formal start of the operation, it is necessary to conduct a comprehensive inspection of the electronic cutting saw, to check whether the link bolts of each part of the cutting machine are loose, check whether the transmission device of the cutting machine is working smoothly, check whether the buttons of the cutting machine are normal, and check whether the smooth system of the cutting machine, pneumatic system and all kinds of safety systems are in good condition. When all these have been checked and there is no problem, it can start up normally.

3. Fine discharge, high utilization rate of raw materials.

The use of general saw because of the number of cutting, scale completely rely on the human brain accounting, that the fault is difficult to avoid, the program is more dependent on the skilled degree of workers, professional level, raw materials often can not be fully used, many expected, and workers rarely recover surplus material, constitute a great waste; After the transformation, the optimized layout of the plate was completed through the calculation of the layout plan by computer. In the later stage, the bar code skill was used to monitor and manage the remaining materials. In the next layout plan, the remaining materials were used first to calculate, and the utilization rate of raw materials improved significantly. Before the formal processing, it is best to first electronic cutting saw empty work, because as long as the empty work to ensure that all parts of the machine are very normal, to ensure safety.

4. The whole process of automatic operation, processing power greatly improved.

Before the transformation, manual operation needs to calculate the chaotic discharging scheme, and repeatedly input the opening data and opening instructions, which requires a lot of time and low operation power; After the transformation, the seamless connection between the computer and the electronic cutting saw is completed. Through the intelligent control software, the layout plan is generated directly through the software, the cutting parameters are directly transferred to the electronic saw, and the production power will be revolutionary progress.

5. No manual input, the machine automatically command.

The artificial opening process before the transformation is obviously affected by the uncertain factors such as the nature of workers, operating emotions and conditions, and the error rate is high, which constitutes a huge waste; After the transformation, the whole process of automatic computer command to get rid of the one-sided reliance on workers, greatly improved the accuracy of processing, reduce the error rate. In the electronic cutting saw work, it is necessary for the operator to pay attention to their health and safety, whether it is feeding or feeding, it is necessary to strictly follow the safety requirements, to avoid accidents.