First of all, the machine and working place clean; Secondly, check whether the vacuuming system is normal; Then check whether the push saw blade is sharp; Whether the size saw blade is in a straight line; Test the machine for about one minute to see if the machine works normally; Finally, prepare the data and auxiliary materials.

Preparation for starting the computer cutting board saw:

1. Check whether the power switch of the computer cutting board saw is pushed in place, and whether the current has a lack of phase, so as to avoid burning the machine motor due to lack of phase when the machine is activated.

2. Clean the machine table and working place. In the operation of the electric cutting board saw, the power of the person standing posture must adhere to straight legs, straight body, can not lie, lean on the operating platform.

3. Check whether the computer cutting board saw blade and sliding table is straight, the size of the saw blade is in the same straight line. Test the machine for about one minute to see whether the computer cutting board saw works normally.

4. First push the pushing bed several times to check whether the slide is smooth. It is necessary to keep the slide clean and smooth.

5. Prepare the materials and auxiliary materials.

Computer cutting board saw has the characteristics of simple operation, stable, safe, efficient, furniture mass, standardization, mechanization, professional production of necessary equipment. The computer cutting board saw produced abroad and in Shenyang has more adaptability and stability in use, and its precision conforms to the cutting requirements of solid wood and composite boards.

‍